Full Tutorial for Installing a New Shower Unit

Call Today

We've discovered this great article about How to Install a Direct-to-Stud Shower Enclosure listed below on the net and believe it made good sense to discuss it with you on this page.

A successful shower installation calls for careful preparation as well as a lot of job. In most cases, you will need to do 3 sorts of tasks: mounting walls, setting up the plumbing, and also finishing wall surfaces.

Preparation

Firstly, you should choose the sort of shower that you wish to set up. It is essential to ascertain whether the chosen shower is capable of coping with certain systems and also can manage a secure level of water with the boiler. A lot of shower devices nowadays are created to be adaptable to different water pressures (such as saved hot water and chilly mains).
It is additionally crucial to consider the water pressure as well as the preparation of the piping and drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be attached to the bathroom tap based on your requirement, and the water temperature level can be changed by means of the faucets. Push-on mixers are cheap and also incredibly easy to mount. However, although the tube link is basic, it is conveniently removed. Additionally, it is troublesome to readjust the temperature level.

Bath/Shower Mixer: The pipe and spray of this sort of shower are combined with a bathroom mixer tap, and the temperature level can be readjusted through the bathroom faucets. It is a really cheap option and no additional plumbing is included. However, the bath/shower mixers also deal with inconvenient temperature level control alternatives.

Guidebook Mixer: The tube and spray of a hand-operated mixer shower unit belong of the wall surface device as well as the hot and cold water materials are attached to a solitary valve The temperature as well as stress of the water are controlled via either one or a range of handles (in a lot more expensive showers). Although temperature control is a lot easier in manual mixer types, they are much more expensive than the previously stated mixers. They likewise call for added plumbing of hot and cold water system pipes.

Thermostatic Mixer: The hose pipe as well as spray of this shower type are a part of the wall unit and the hot and cold water supplies are attached to a single valve below too. It is total with a built-in stabiliser to self-adjust the water temperature level and also to stop it from becoming as well hot. Among the biggest advantages of a thermostatic mixer shower type consists of hassle-free temperature control. However, it is the most expensive of the various mixer alternatives.

Power Shower: A power shower is a solitary unit including an effective electrical pump that can modifying both the water pressure as well as temperature level. This type of shower can be fitted if there is water system from a cold water cistern as well as a hot water cyndrical tube. A power shower makes the change of both stress and also temperature level simple. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is provided by a combination boiler under keys pressure.

Electric Shower: An electric shower is plumbed into a keys cold water supply and also it heats the water electrically. It is essential to keep in mind that for this shower type to be installed, the keys stress requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system allows the temperature and also stress to be changed through a handle. Models with temperature stabilisers are better as they stay unaffected by various other taps somewhere else in use within the house. A significant downside of electric showers is that the control handle only enables the alternative of heats at less stress, or reduced temperatures at a higher stress. This is problematic in the winter when the spray is typically weak and the keys water is chillier. Nevertheless, this issue is dealt with in some models which are readily available with a winter/summer setting.

Method

Depending on the type of shower you wish to set up, the shower head should either be fitted in order to prevent its contact with the water in the bathroom listed below or the base tray, or it should have a check shutoff.
Before beginning, it is advisable to note the positions of the shower head and also control, and to intend the pipe-work involved. In addition, the water drainage system to eliminate the drainage will need to be intended. Both positions of the cord path and the shower button will certainly additionally need to be considered if an immediate or electric shower unit is being mounted.
Use the direction guide provided with the shower system to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is necessary to cut off the supply of water. In order to secure the pipes, they ought to be provided a water resistant covering and likewise fitted with separating valves. The pipes can after that be hidden into the wall and glued over to neaten the total look.
Fit the base tray, shower head, as well as installations.
Connect the primary shower control to the pipelines that will certainly be providing the water (This may require a women screw string adapter).
Reconnect the water as well as test the pipelines for any leaks, as some might require tightening up.
If you are mounting an electric shower, bear in mind to switch off the power supply before making any type of electric connections. Once these links have been made (there need to be guidance within the user's manual), the power supply can be changed back on.

Readjusting Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a greater elevation (in some cases as little as 150mm (6inches)) by fitting a strong wooden assistance below it - potentially composed of struts and also blockboards. If you select this choice, the major and also circulation pipelines will certainly additionally need to be increased to satisfy the new elevation of the tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be connected into the power supply in order to run.

Piping and Water drainage

It is best to utilize 15mm diameter supply pipes, and also make the go to the shower as short and also straight as feasible so as to maintain maximum stress and also minimise heat loss. In addition, by reducing the use of elbow joints for pipe corners, you can lower the resistance in the flow of the supply of water. You can achieve this by flexing the pipes instead.

Many Common Errors

Breaching or ignoring regional code limitations.

Using pipelines that are too little.

Affixing copper to galvanized without using a brass or dielectric suitable in between both.

Not making use of tape or pipe compound at threaded joints.

Not leveling your components when mounting them.

Not setting up an air space filling up for fixtures.

Reducing supply stub outs as well short to set up the shutoff valves onto after the completed wall surface is in location.

Not correctly aligning tubes right into installations or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leakage.).

When turning the water back on in your house, always run the outside hose pipe valve or purge your bathrooms to hemorrhage dirt as well as air from the lines. This debris can create problems in your sink taps and various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I ran across that blog post on How to Install a Shower Enclosure when doing a lookup on the web. If you enjoyed reading our post if you please do not forget to pass it around. We treasure reading our article about How to Install a One-Piece Shower Unit.

Get Estimate